There is no need to tolerate a filthy garage floor, driveway, or concrete patio. Clean the path with the SurfaceMaxx Stainless Steel Surface Cleaners. Available in two sizes, they feature dual rotating nozzles that provide a wide cleaning path allowing you to clean surfaces quickly and thoroughly.  The surface cleaners are constructed of professional grade materials including a corrosion-resistant, stainless-steel housing that will stand up to the elements.  The durable manifold provides long lasting and reliable operation while the non-marking swivel wheels make for easy maneuverability.  The stainless-steel surface cleaners deliver professional results, but it is very easy to connect and operate.  The 1/4-inch quick connect plug allows you to start large cleaning projects immediately without lengthy setup.  The SurfaceMaxx Stainless Steel Surface Cleaners works best with gas pressure washers from 2800-4500 PSI.

Steps to Clean the Path

Assembly

1. The Stainless Steel Surface Cleaner comes completely assembled and ready for use.
2. Connect pressure washer hose to the pressure washer and turn the engine switch to the “on” position.  Please refer to pressure washer owner manual for further instructions.*
3. Attach the surface cleaner’s ¼-inch quick connect plug into the end of the pressure washer wand.

NOTE: Always refer to your pressure washer owner manual for operating, safety and troubleshooting instructions.
CAUTION: Risk of injury can occur if the surface cleaner ¼-inch quick connect plug is not properly inserted into the quick connect coupler.  Make sure you hear a “click” sound when attaching the ¼-inch quick connect plug to the quick connect coupler. 
CAUTION: Pull the surface cleaner to make sure it is seated properly before operating your unit.

Operation

1. Squeeze the trigger and then move the surface cleaner back and forth and side to side to begin cleaning.
2. Never operate in the same area for more than 2 seconds as damage may result.

If striping or swirling occurs:

1. Slow your pace and try cleaning the area by going back and forth and side to side.
2. Try overlapping when cleaning by 50%.
3. Check to see if one or both of your nozzles are clogged.  Please follow the “maintenance” instructions in the SurfaceMaxx Stainless Steel Pressure Washer Surface Cleaner instruction manual.

NOTE: Always squeeze the spray gun’s trigger to release any residual pressure immediately after use.  Engage the trigger lock when not in use.
CAUTION: Striking any raised obstacle while using the surface cleaner could damage the unit.  If contact does occur and causes vibration when operating the surface cleaner, stop use immediately.  Continuing to operate the unit may result in serious injury.

That’s it!  You are now ready to get pro performance and a powerful clean.

So, the next time you need to clean your garage floor, driveway, or concrete patio, visit your local Lowe’s store and purchase a SurfaceMaxx Stainless Steel Surface Cleaner